D-Link DFL-260E

Default Severity
WARNING
Log Message
Administrative user <username> failed to log in via <authsystem>,
because of bad credentials
Explanation
An adminsitrative user failed to log in to configuration system. This is
most likely due to an invalid entered username or password.
Gateway Action
disallow_admin_access
Recommended Action
None.
Revision
1
Parameters
authsystem
username
[server_ip]
[server_port]
[client_ip]
[client_port]
2.42.35. sslvpnuser_login (ID: 03203004)
Default Severity
NOTICE
Log Message
SSL VPN user <username> logged in via <authsystem>.
Explanation
An SSL VPN user has logged in to the SSL VPN user page.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
authsystem
username
userdb
server_ip
server_port
client_ip
client_port
2.42.36. activate_changes_failed (ID: 03204000)
Default Severity
NOTICE
Log Message
Bidirectional confirmation of the new configuration failed, previous
configuration will be used
Explanation
The unit failed to establish a connection back to peer, using the new
configuration. The previous configuration will still be used.
Gateway Action
using_prev_config
Recommended Action
Make sure that the new configuration allows the unit to establish a
connection with the administration interface.
2.42.35. sslvpnuser_login (ID:
03203004)
Chapter 2. Log Message Reference
430