EasyManua.ls Logo

D-Link DFL-260E

D-Link DFL-260E
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Revision
1
Parameters
rule
iface
remotegw
2.32.24. pptp_no_userauth_rule_found (ID: 02700026)
Default Severity
WARNING
Log Message
Did not find a matching userauth rule for the incoming PPTP
connection. Interface: <iface>, Remote gateway: <remotegw>.
Explanation
The PPTP server was unsuccessful trying to find a userauth rule
matching the incoming PPTP connection.
Gateway Action
None
Recommended Action
Make sure the userauth rules are configured correctly.
Revision
1
Parameters
iface
remotegw
2.32.25. malformed_packet (ID: 02700027)
Default Severity
WARNING
Log Message
Malformed packet received from <remotegw> on <iface>. Error code:
<error_code>
Explanation
A malformed packet was received by the PPTP interface.
Gateway Action
None
Recommended Action
None.
Revision
1
Parameters
iface
remotegw
error_code
2.32.26. waiting_for_ip_to_listen_on (ID: 02700050)
Default Severity
WARNING
Log Message
PPTP server <iface> cannot start until it has an IP address to listen on.
Explanation
The PPTP server cannot start until it has a proper IP address to listen
on.
Gateway Action
None
Recommended Action
Make sure that the IP address is configured correctly on the PPTP
2.32.24. pptp_no_userauth_rule_found
(ID: 02700026)
Chapter 2. Log Message Reference
381

Table of Contents

Other manuals for D-Link DFL-260E

Related product manuals