2.22.94. invalid_configuration_of_force_open (ID:
01802104)
Default Severity
ERROR
Log Message
Auto-start rule does not specify single IP address or domain name for
its remote peer
Explanation
Can not use Auto-start rule (force open) for roaming tunnels.
Gateway Action
VPN_tunnel_disabled
Recommended Action
Reconfigure_IPsec.
Revision
1
2.22.95. invalid_rule_setting (ID: 01802105)
Default Severity
ERROR
Log Message
Both REJECT and PASS defined for a rule
Explanation
Can not specify both pass and reject for a rule.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.96. invalid_rule_setting (ID: 01802106)
Default Severity
ERROR
Log Message
The AUTHENTICATION-ONLY can be specified only for PASS
rules
Explanation
Can only specify AUTHENTICATION-ONLY with PASS rules.
Gateway Action
None
Recommended Action
None.
Revision
1
2.22.97. invalid_rule_setting (ID: 01802107)
Default Severity
ERROR
Log Message
To-tunnel specified for a REJECT rule
Explanation
To-tunnel can not be specified for REJECT rule.
Gateway Action
None
2.22.94. invalid_configuration_of_force_open
(ID: 01802104)
Chapter 2. Log Message Reference
277
To Next Page
Loading...
