D-Link DFL-260E

Default Severity
WARNING
Log Message
Checksum mismatch. Received was <recv_chksum>, mine is
<my_chksum>
Explanation
Received OSPF data from neighbor with mismatching checksum.
Gateway Action
drop
Recommended Action
Check network equipment for problems.
Revision
1
Parameters
recv_chksum
my_chksum
Context Parameters
Rule Name
2.29.21. dd_mtu_exceeds_interface_mtu (ID: 02400100)
Default Severity
WARNING
Log Message
Neighbor <neighbor> MTU is too high. Received DD has MTU
<dd_mtu>. Interface MTU is <iface_mtu>
Explanation
Received database description from neighbor with too high MTU.
Gateway Action
drop
Recommended Action
Lower the MTU on the neighboring OSPF router.
Revision
1
Parameters
neighbor
dd_mtu
iface_mtu
Context Parameters
Rule Name
2.29.22. m_ms_mismatch (ID: 02400101)
Default Severity
WARNING
Log Message
Neighbor <neighbor> M/MS mismatch. Restarting exchange
Explanation
Received indication that a neighbor got the M/MS (master/slave) role
wrong.
Gateway Action
restart
Recommended Action
None.
Revision
1
Parameters
neighbor
Context Parameters
Rule Name
2.29.21. dd_mtu_exceeds_interface_mtu
(ID: 02400100)
Chapter 2. Log Message Reference
349