D-Link DFL-260E

Default Severity
INFORMATIONAL
Log Message
IPsec tunnel removed from the configuration
Explanation
An IPsec tunnel has been disabled or removed from the configuration.
Gateway Action
reconfiguration
Recommended Action
None.
Revision
1
Parameters
client_ip
username
IPsec_tunnel
2.22.55. tunnel_disabled (ID: 01800340)
Default Severity
WARNING
Log Message
Tunnel <tunnel> disabled due to configuration error.
Explanation
Tunnel [tunnel] disabled due to configuration error.
Gateway Action
tunnel_disabled
Recommended Action
Tunnel_disabled.
Revision
1
Parameters
tunnel
2.22.56. tunnel_cfg_error (ID: 01800341)
Default Severity
CRITICAL
Log Message
Critical configuration error on tunnel <tunnel>.
Explanation
Critical configuration error on tunnel [tunnel].
Gateway Action
restart
Recommended Action
Restart.
Revision
1
Parameters
tunnel
2.22.57. ippool_does_not_exist (ID: 01800400)
Default Severity
WARNING
Log Message
IP pool does not exist: <ippool>
Explanation
The config mode pool refers to an IP pool that does not exist. As a
2.22.55. tunnel_disabled (ID:
01800340)
Chapter 2. Log Message Reference
265