D-Link DFL-260E

Default Severity
WARNING
Log Message
TFTPALG: Option <option> contained no readable value
Explanation
Option contained no readable value.Closing connection.
Gateway Action
close
Recommended Action
None.
Revision
1
Parameters
option
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.141. blksize_out_of_range (ID: 00200363)
Default Severity
WARNING
Log Message
TFTPALG: Option blksize value <old_blksize> exceeding allowed
value. Rewriting to <new_blksize>
Explanation
Option blksize value exceeding allowed value.Rewriting value.
Gateway Action
rewrite
Recommended Action
If the value should be allowed modify the TFTP Alg configuration.
Revision
1
Parameters
old_blksize
new_blksize
Context Parameters
ALG Module Name
ALG Session ID
Connection
2.1.142. max_tftp_sessions_reached (ID: 00200364)
Default Severity
WARNING
Log Message
FTPALG: Maximum number of TFTP sessions (<max_sessions>) for
service reached. Closing connection
Explanation
The maximum number of concurrent TFTP sessions has been reached
for this service. No more sessions can be opened before old sessions
have been released.
Gateway Action
close
Recommended Action
If the maximum number of TFTP sessions is too low, increase it.
Revision
1
Parameters
max_sessions
2.1.141. blksize_out_of_range (ID:
00200363)
Chapter 2. Log Message Reference
91