Daedong DK4520 - Tread

4
-
56
DK4220/4520/4720/5020/5320/5520/6020
T46W031A
TD2O457A
TREAD
When working on a eld where crops are linearly aligned, the tread should be
adjusted so that the tires do not cross over the crops. Also, it is necessary to
increase the tread to prevent any accident when working on a slope or trailing.
(1) Bolt (2) Rim bolt (3) Rim (4) Disc
WARNING
• Do not weld or apply heat to
the tire rim or disc. The tire
can explode due to the rapidly
increased pressure in the tire.
• Check tires for ination pres-
sure, damage, deformation,
and excessive wear on lug and
damage of rim and disc. Also
check if wheel bolts, rim bolts,
and nuts are loose.
WARNING
Never operate tractor with a loose rim, wheel, or axle.
• Always tighten nuts or bolts to the specied torque.
• Make sure to perform inspection daily.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 56OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 56 2023-09-22 오전 11:35:482023-09-22 오전 11:35:48