EasyManua.ls Logo

Daedong DK4520 - Checking Coolant Level

Daedong DK4520
240 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
58
8
-
15
MAINTENANCE
TD2O708A
(1) Reservoir Tank
(A) FULL (B) LOW
CHECKING COOLANT LEVEL
1. Check to see that the coolant level
is between the "FULL" and "LOW "
marks of reservoir tank.
2. When the coolant level drops due
to evaporation, add water only up
to the "FULL" level mark. In case
of leakage, add anti-freeze and
water in the specied mixing ratio
up to the middle of the range. (Re-
fer to the instructions for cleaning
the cooling system and changing
coolant in Chapter Maintenance
for every two years.)
3. The tractor is furnished in the fac-
tory with a mixture of anti-freeze
(ethylene glycol) and water in a ra-
tio of 50:50 which is usable in any
season.
IMPORTANT
When using oil of different
maker or viscosity from the
previous one, remove all of the
old oil. Never mix two di󰀨erent
types of oil.
Do not start the engine when the
oil level is below lower limit.
Wipe the oil dipstick with clean
cloth or tissue. If foreign ma-
terial enters the oil sump, it
can lead to malfunction of the
engine.
Never add the oil over the upper
limit.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 15OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 15 2023-09-22 오전 11:36:152023-09-22 오전 11:36:15

Table of Contents

Related product manuals