Daedong DK4520 - Turning; Driving on Slope

5
5
-
15
OPERATION
IMPORTANT
• The tractor may move slowly
with the engine running, even
though the main and shuttle
shift levers are in the neutral
position. This is normal and is
due to the uid friction in the
transmission. This symptom
can occur easily when the en-
gine rpm is high, the low speed
gear is selected by the range
shift lever, and the viscosity of
the transmission uid is high
due to low temperature. To pre-
vent this symptom, make sure
to apply the parking brake.
• Get o󰀨 the tractor after checking
that the tractor is completely
stopped and the parking brake
is rmly applied.
• Do not park the tractor on tall
grass or hay. If grass or hay
contacts with the mu󰀪er, it can
catch re.
You should turn slowly by reducing ve-
hicle speed.
TURNING DRIVING ON SLOPE
1. Please drive according to the con-
ditions of the slope at safe speed
so that the engine is not under
heavy load if possible.
2. Make sure to shift to the lower
gear in order to prevent the engine
from stalling on an uphill.
3. Drive with the low speed gear on
a downhill road to facilitate the en-
gine brake.
WARNING
To prevent accidents due to loss
of steering control:
• If you turn at high speed, the
tractor can turn over.
• Never use the di󰀨erential lock
system turning at high and low
speeds. A serious accident can
occur.
WARNING
• Make sure the brake pedals are
interlocked and di󰀨erential lock
pedal is released.
• Put the shift lever in the neutral
position on a steep slope. Oth-
erwise, the tractor may become
inoperable.
• Before entering a steep slope,
move the shift lever down to
a proper gear and never try to
move the shift lever on a slope.
A serious accident can occur.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_05.indd 15OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_05.indd 15 2023-09-22 오전 11:35:562023-09-22 오전 11:35:56