Daedong DK4520 - Cruise Pto Warning Lamp; Pto Indicator

4
-
20
DK4220/4520/4720/5020/5320/5520/6020
The switch is used to set the PTO
rpm. With the PTO cruise button set
in the ON position, pressing the SET
(-) button turns on this lamp.
CRUISE PTO WARNING LAMP
TD2O420C
PTO INDICATOR
This indicator shows the PTO en-
gagement condition. When the PTO
is engaged, this indicator comes on.
When the PTO clutch is disengaged,
this indicator goes o󰀨.
TD2O423C
WARNING
• Other general operation cannot
be performed during the manual
regeneration process. During
regeneration, the engine speed
is maintained
- 1st: Before Mode: 30 ~ 700 sec.
at 1,500 rpm
- 2nd: Regen Mode: 1,500 sec. at
2,600 rpm
- 3rd: After Mode: 180 sec. at
1,600 rpm
ref) For models with non turbo
engine, engine speed will go
up to 2,600 and keep running
for 30~300sec.
CAUTION
• Set the PTO switch to the “OFF”
position in order to start the
engine.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 20OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 20 2023-09-22 오전 11:35:392023-09-22 오전 11:35:39