Daedong DK4520 - Installing Pto Shaft

57
7
-
7
3-POINT HITCH IMPLEMENT AND LOADER OPERATION
(1) Safety Chain
H11O104A
H11O682A H11O682A
1. Consult your local KIOTI Dealer for
selection of the universal joint.
2. When selecting a universal joint,
make sure that it is not too short to
come off of the female and male
shafts at the highest position or too
long to impact its female and mail
shafts at the lowest position.
3. Move the joint back and forth to
check that its lock pin is properly
seated to the groove of the PTO
shaft.
(1) Universal Joint
INSTALLING PTO SHAFT
WARNING
• Never use any other part for
pulling except draw bar. Pulling
with top link, ROPS and etc. will
cause a fatal accident.
• Be sure to install the auxiliary
safety chain when installing a
trailer.
• Improper use of the draw-bar,
even if correctly positioned, can
cause a rear overturn.
• Do not overload an attachment
or towed equipment. Use proper
counterweights to maintain trac-
tor stability. Hitch heavy loads to
the draw-bar only.
• Make sure that there is no one
nor object between the tractor
and trailer.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_07.indd 7OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_07.indd 7 2023-09-22 오전 11:36:052023-09-22 오전 11:36:05