7
-
8
DK4220/4520/4720/5020/5320/5520/6020
1
1
C56O140A
T66O122A
(1) Lock Pin
WARNING
•
Before starting up any PTO-driv-
en implement hitched to the
three-point linkage, lift the
implement to its full height and
check that at least 1/4 of the
total length of the telescopic
section of the drive shaft is
engaged.
WARNING
•
Make sure that the PTO safety
cover is in its position before
driving the PTO shaft.
•
Never go close to the rotating
PTO or tractor PTO shaft. A se-
vere accident can happen.
•
Before driving an implement
through the PTO, always make
sure that all bystanders are well
away from the tractor.
•
When using the PTO drive with
a stationary tractor, always
make sure that the gears are
in neutral and that the parking
brake is applied.
•
The tractor PTO and PTO shaft
should not be interfered by any
surrounding parts.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_07.indd 8OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_07.indd 8 2023-09-22 오전 11:36:052023-09-22 오전 11:36:05
To Next Page
Loading...
