Daedong DK4520 - Pto Cruise Setting Switch

4
4
-
13
FUNCTION DESCRIPTION AND OPERATING TIPS
(1) RES/SET Button
PTO CRUISE SETTING SWITCH
PTO CRUISE ACTIVATION
Run the engine at a speed over 1,300
RPM. With the brake pedal released,
set the PTO cruise switch to the ON
position and press the SET (1) por-
tion of the cruise activation switch
The cruise setting switch can be
operated as follows while the PTO
cruise function is activated.
1
1
1
D21O437A
• RES(+) : Speed is increased by 50
RPM when pressing it.
• SET(-) : Speed is decreased by 50
RPM when pressing it.
PTO CRUISE DEACTIVATION
Depress the brake pedal or set the
PTO cruise switch to the "OFF" po-
sition to deactivate the PTO cruise
function.
If the PTO cruise function is deacti-
vated by depressing the brake pedal
with the PTO cruise switch set in the
"ON" position, pressing the RES(+)
switch once resumes the previous
PTO activation setting.
IMPORTANT
• If the brake pedals are not
connected to each other, de-
pressing the brake pedal does
not deactivate the PTO cruise
function.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 13OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 13 2023-09-22 오전 11:35:372023-09-22 오전 11:35:37