Daedong DK4520 - Pto Cruise

4
-
10
DK4220/4520/4720/5020/5320/5520/6020
1
1
2
2
1
2
PTO CRUISE
This function is to control the engine
speed for convenient operation at
over 1,300 rpm.
(1) PTO Cruise Switch
(2) PTO Cruise Control Switch
PTO CRUISE ACTIVATION
Run the engine at a speed over 1,300
RPM. Set the desired engine speed.
Then, with the brake pedal released,
set the PTO cruise switch to the ON
position and press the SET (-) por-
tion of the PTO cruise control switch.
The cruise control switch can be
operated as follows while the PTO
cruise function is activated:
• RES(+): Increment by 50 rpm
• SET(-): Decrement by 50 rpm
D21O435A
CAUTION
• If the hazard lamps are turned on
for an extended period of time
while the engine is stopped, the
battery can be discharged. There-
fore, use them only in emergency.
• The hazard lamp can be oper-
ated without the key inserted.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 10OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 10 2023-09-22 오전 11:35:362023-09-22 오전 11:35:36