Daedong DK4520 - Seat Adjustment

4
4
-
33
FUNCTION DESCRIPTION AND OPERATING TIPS
(1) Seat Adjustment Lever
(A) Pull
To adjust the seat position, pull the
lever (1) to left under the front of the
seat, slide the seat to the desired po-
sition, and then release the lever.
Make sure that the seat is rmly xed
by moving it gently after adjustment.
SEAT ADJUSTMENT
SEAT SLIDING
1
1
11
A
A
A
D21O417A
CAUTION
• Do not put a hand between the
seat and the slides when adjust-
ing the seat position. You can
get injured unexpectedly.
WARNING
• Never Leave the driver’s seat
while the engine running.
• Before leaving the seat, be
sure to turn o󰀨 any implements
which are equipped with rotat-
ing blades such as rotary tiller,
rotary cutter, mid/rear mower,
snow blower, etc. and turn o󰀨
the engine.
The seat height can be adjusted to
fit to the driver. Turning the handle
(1) on the front of the seat clockwise
raises the seat while turning it coun-
terclockwise lowers the seat.
(1) Seat Height Adjustment Handle
SEAT HEIGHT ADJUSTMENT
111
D21O418A
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 33OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_04.indd 33 2023-09-22 오전 11:35:432023-09-22 오전 11:35:43