8
-
21
(1) Bevel Gear Case (LH/RH)
(1) Front Bracket (Axle Pivot)
(2) Rear Bracket (Axle Pivot)
(1) Position Control Lever Shaft Housing
TD2O419A
TD2O716A
TD2O717A
Apply quality multi-purpose grease to the locations specied in the following gure at every 50 hours of use or when
necessary. Also, record the operating hour on every application.
EVERY 50 HOURS
LUBRICATING GREASE NIPPLE
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 21OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 21 2023-09-22 오전 11:36:152023-09-22 오전 11:36:15