5
-
5
6. Insert the key into the key switch,
turn it to the "ON" position and wait
until the glow plug indicator goes
o (Depending on the coolant tem-
perature).
It is normal that the charge warn-
ing lamp and engine oil pressure
warning lamps come on when the
key is in “ON” position before the
engine starts.
(1) Key Switch
(A) OFF (B) ACC
(C) ON (D) START
A
B
C
D
A
B
C
D
1
11
D21O444A
7. When the engine is started, re-
lease the key. Then, the key is
automatically turned back to the
“ON” position.
8. Warm up the engine for 3 to 4
minutes (10 minutes in winter).
(1) Instrument Cluster
(2) Engine Oil Pressure Warning Lamp
(3) Charge Warning Lamp
9. Check to see that all the warning
lamps on the instrument cluster
turn “OFF”.
If any lamp remains on, immediately
stop the engine and determine the
cause.
1 2 31 2 3
TD2O503B
WARNING
•
Never operate the start motor
for more than 10 consecutive
seconds as it consumes an
excess of battery power. If the
engine cannot be started within
10 seconds, wait for 30 seconds
and try again.
•
When trying to start the engine
again, wait until the ywheel is
completely stopped.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_05.indd 5OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_05.indd 5 2023-09-22 오전 11:35:552023-09-22 오전 11:35:55
To Next Page
Loading...
