6
-
3
(A) Within 15°
LF1O519A
A
A
5. Be sure to keep the speed down
when loading/unloading.
6. After loading the tractor onto
the transport vehicle, secure the
tractor first by setting the park-
ing brake, then tying down to the
transport with chains or straps.
Utilize the tie down points built into
the tractor to not damage the trac-
tor during transit.
7. The permitted angle for the opera-
tion of the engine is 10°. Under no
circumstance can the machine be
operated over the permitted angle
for the operation of the engine.
Otherwise, the engine may be
seized, or the main lubricating
parts may be worn out early, caus-
ing damage to the machine and
injuries.
8. During vehicle transporting, pay
attention to motor vehicle laws,
mark the transport with the appli-
cable decals or markings.
9. Be sure to Confirm the overall
height of the vehicle with the trac-
tor loaded, make sure that does
not exceed the maximum height
for travel under bridges or through
tunnels.
WARNING
When transporting the tractor
with a truck, x the tractor rmly
onto the truck and be sure to
aware the height of loaded trac-
tor to avoid to hit the ceiling of
the tunnel or the bottom of the
bridge.
Make sure to follow this instruc-
tion as such accidents really
happen.
CAUTION
• Select the ramp load by check-
ing the weight of the tractor.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_06.indd 3OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_06.indd 3 2023-09-22 오전 11:36:002023-09-22 오전 11:36:00
To Next Page
Loading...
