8
-
18
DK4220/4520/4720/5020/5320/5520/6020
4. Unscrew the fluid filter from the
rear right section on the tractor us-
ing a lter wrench.
(1) Oil Dipstick (2) Oil Filler Plug
(A) Oil Level Is Acceptable Within This Range
5. Apply a thin lm of clean oil onto
the O-ring of a new lter.
6. Tighten the lter until it touches the
mounting surface. Then, tighten
the lter for a half turn further with
a hand.
7. After installing a new lter, run the
engine for a few minutes and stop
it.
8. Check the oil level again and add
more oil to the specied level.
TD2O704A
Oil Capacity
11.36 U.S.gal. (43 L)
IMPORTANT
• To prevent serious damage to
the hydraulic system, use only
a KIOTI genuine lter.
• Do not operate the tractor
immediately after changing
transmission uid. Run the en-
gine at medium speed for a few
minutes to prevent damage to
the hydraulic system.
CAUTION
To avoid injury:
• Be sure to stop the engine
before changing the fluid or
replacing the lter.
• Cool down the uid suciently.
You can get burnt by hot uid.
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 18OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_08.indd 18 2023-09-22 오전 11:36:152023-09-22 오전 11:36:15
To Next Page
Loading...
