Daedong DK4520 - Page 53

SPECIFICATIONS
3
3
-
9
※
The specications are subject to change without notice.
ITEM
MODEL
DK4220HSE DK4720HSE DK5320HSE DK6020HSE
Hydraulic sys-
tem
Max. lifting capacity
kgf (lbs.)
From 24 in. (61
cm) Behind
1,232 (2,716) 1,232 (2,716) 1,232 (2,716) 1,232 (2,716)
At lower link
ball
1,360 (2,998) 1,360 (2,998) 1,360 (2,998) 1,360 (2,998)
Number of External Hydraulic valves 1 (2 port) 1 (2 port) 1 (2 port) 1 (2 port)
PTO
Rear
Type Independent Independent Independent Independent
PTO shaft
SAE 1-3/8, 6
Spline
SAE 1-3/8, 6
Spline
SAE 1-3/8, 6
Spline
SAE 1-3/8, 6
Spline
Speed rpm 540 540 540 540
Min. turning radius
(with one rear wheel braked)
in. (mm) 102.8 (2,610) 102.8 (2,610) 102.8 (2,610) 102.8 (2,610)
Weight (with ROPS) lbs. (kg) 3,522 (1,598) 3,522 (1,598) 3,522 (1,598) 3,522 (1,598)
Draw-bar
Max. Drawbar vertical load lbs.(daN) 1,655 (750) 1,655 (750) 1,655 (750) 1,655 (750)
Max. Trailer loading weight lbs.(kg) 9,480 (4,300) 9,480 (4,300) 9,480 (4,300) 9,480 (4,300)
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_03.indd 9OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_03.indd 9 2023-09-22 오전 11:35:262023-09-22 오전 11:35:26