Daedong DK4520 - Page 56

DK4220/4520/4720/5020/5320/5520/6020
3
-
12
※
The specications are subject to change without notice.
ITEM
MODEL
DK4220CHSE DK4720CHSE DK5320CHSE DK6020CHSE
Hydraulic sys-
tem
Max. lifting capacity
kgf (lbs.)
From 24 in. (61
cm) Behind
1,232 (2,716) 1,232 (2,716) 1,232 (2,716) 1,232 (2,716)
At lower link
ball
1,360 (2,998) 1,360 (2,998) 1,360 (2,998) 1,360 (2,998)
Number of External Hydraulic valves 1 (2 port) 1 (2 port) 1 (2 port) 1 (2 port)
PTO
Rear
Type Independent Independent Independent Independent
PTO shaft
SAE 1-3/8, 6
Spline
SAE 1-3/8, 6
Spline
SAE 1-3/8, 6
Spline
SAE 1-3/8, 6
Spline
Speed rpm 540 540 540 540
Min. turning radius
(with one rear wheel braked)
in. (mm) 102.8 (2,610) 102.8 (2,610) 102.8 (2,610) 102.8 (2,610)
Weight (with CABIN) lbs. (kg) 3,522 (1,598) 3,522 (1,598) 3,522 (1,598) 3,522 (1,598)
Draw-bar
Max. Drawbar vertical load lbs.(daN) 1,655 (750) 1,655 (750) 1,655 (750) 1,655 (750)
Max. Trailer loading weight lbs.(kg) 9,480 (4,300) 9,480 (4,300) 9,480 (4,300) 9,480 (4,300)
OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_03.indd 12OM_TD220(DK4220,4520,4720,5020,5320,5520,6020)-EN(USA)_03.indd 12 2023-09-22 오전 11:35:272023-09-22 오전 11:35:27