3-13
Maintenance
Suspension
Do not ride a vehicle with a faulty suspension.
Loose, worn or damaged suspension parts
impair vehicle stability and control.
Front
Check the action of the fork by compressing
the front suspension several times.
Check the entire fork assembly for leaks,
damage, or looseness.
Perform the light adjustment by loosening the
lock nut from the handle and turning the
adjuster.
Perform the main adjustment by loosening the
lock nut from the engine and turning the
adjusting nut.
Tighten the lock nut.
Inspect the clutch operation.
Side Stand
Set up the main stand.
Check of smooth operation, when pulling the
low end part of the side stand.
If the side stand is hard, coat the pivot with
grease.
If the side stand moves too freely, inspect the
side stand spring. Make sure that the side
stand is not bent.
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock NutLock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Adjuster
Adjuster
Adjuster
Adjuster
Adjuster
AdjusterAdjuster
Adjuster
Adjuster
Adjuster
Adjuster
Adjuster
Adjuster
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock NutLock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Lock Nut
Adjust Nut
Adjust Nut
Adjust Nut
Adjust Nut
Adjust Nut
Adjust NutAdjust Nut
Adjust Nut
Adjust Nut
Adjust Nut
Adjust Nut
Adjust Nut
Adjust Nut
!
CAUTION
△