8-12
Cylinder Head / Valve
Install the valve springs. The springs tightly
would coils should face toward the cylinder
head.
Install the springs retainer.
Compress the valve spring and install the valve
cotters.
To prevent the loss of tension, do not compress
the valve springs more than necessary to install
the valve cotters.
Tool: Valve spring compressor
Tap the valve stems gently two or three times
with a soft hammer to firmly seat the cotters.
Be careful not to damage the valve.
Coat a new O-ring with engine oil and install it
into the carburetor insulator groove.
Install the carburetor insulator with the
mounting bolt tightly.
Install the cam chain tensioner and tighten the
pivot bolt.
Torque : 1.1kgf-m(11N.m)
Install the spark plug.
Torque : 1.1kgf-m(11N.m)
NOTE
NOTE
For Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder HeadFor Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder Head
For Cylinder Head
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring CompressorValve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Valve Spring Compressor
Pivot Bolt
Pivot Bolt
Pivot Bolt
Pivot Bolt
Pivot Bolt
Pivot BoltPivot Bolt
Pivot Bolt
Pivot Bolt
Pivot Bolt
Pivot Bolt
Pivot Bolt
Pivot Bolt
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain TensionerCam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
Cam Chain Tensioner
To Next Page
Loading...
Need help?
General
