Web Interface 93
Status Statistics 7.16
You can view the on line and off line status of the VTO and the VTH.
Select System Config > Status Statistics > Device Status, and then the Device Status
interface is displayed. See Figure 7-54. You can view information such as device status, IP port,
register time, and off time.
Device status Figure 7-54
There are Online and Offline in the Status column.
Offline: the VTO is not connected with VTH, and it cannot make phone call, do area
monitor or talk to the VTH.
Online: the VTO is connected with VTH, and it can make phone call, do area monitor or
talk to the VTH.
Rebooting Device 7.17
You can reboot the VTO from the Web interface.
Select System Config > Logout > Reboot Device, and then the Reboot Device interface is
displayed. See Figure 7-55.
Click Reboot Device, and then the VTO reboots, and then the login interface is displayed.
Reboot device Figure 7-55
Logout 7.18
Select System Config > Logout > Logout, and then the Logout interface is displayed. See
Figure 7-56.
Click Logout, and then the login interface is displayed.
To Next Page
Loading...
Need help?
General
