Web Interface 60
Login Figure 7-4
Enter the user name and the password, and then click Login. Step 2
The default user name is admin.
The password is what you configured during initialization.
System Config 7.3
7.3.1 Local Config
This section introduces how to configure fill light sensitivity, storage path, shout time, device
type, reboot date, and center control number.
Select System Config > Local Config > Local Config. Step 1
The Local Config interface is displayed. See Figure 7-5.
Local config Figure 7-5
Configure parameters, and for the detailed description, see Table 7-1. Step 2
Table 7-1 Local config parameter
Sensitivity of fill
light to open
The bigger the value is, the more sensitive the fill light will be.
To Next Page
Loading...
