Dahua DH-VTO9341D - Web Interface Management; Web Interface Setup and Login

Web Interface 58
7 Web Interface
Initializing VTO 7.1
 For first time login or after the VTO being reset, you need to initialize the Web interface.
 Make sure the PC is in the same network segment with the VTO.
Enter the default IP address of the VTO in the address bar, and then press Enter. Step 1
The password setting interface is displayed. See Figure 7-1.
Password setting Figure 7-1
Enter and confirm the password, and then click Next. Step 2
The Email setting interface is displayed. See Figure 7-2.
This password is to login the Web interface, and it should contain at least 8 digits and at
least two types from number, letter, and symbol.