Web Interface 76
DDNS Config Figure 7-26
Select Enable to enable DDNS. Step 2
Configure parameters. See Table 7-13 for the details. Step 3
Table 7-13 DDNS parameter description
The name and web address of the DDNS service provider, see the
matching relationship below:
The web address of Dyndns DDNS: members.dyndns.org.
The web address of NO-IP DDNS: dynupdate.no-ip.com.
The port number of the DDNS server.
The domain name you registered on the DDNS website.
Enter the user name and password you got from the DDNS service provide.
You need to register an account (with user name and password) on the
DDNS service provides’ website.
The time interval that the VTO syncs IP address with the DDNS server.
To avoid too much burden on the network, it is recommended that this value
be configured around 300.
Click OK to save. Step 4
Open the browser, then enter the domain name you registered on the DDNS website at
the address bar, and then press Enter, if the login interface is displayed, configure
succeeded; if not, check it again.
Video Set 7.7
This section introduces how to configure the size of the video and audio that the VTO recorded.
7.7.1 Video Set
Select System Config > Video Set > Video Set. Step 1
The Video Set interface is displayed. See Figure 7-27. Click Open Door, and then the
door opens.
To Next Page
Loading...
Need help?
General
