Web Interface 63
Select System Config > Local Config > Talk Manager. Step 1
The Talk Manager interface is displayed. See Figure 7-7.
Talk manager
Figure 7-7
Configure Talk manager parameters. See Table 7-3 for the details. Step 2
Table 7-3 Talk manager parameter
Select Turn on, and then the system takes 2 snapshots when calling,
and 1 snapshot after the call is answered. The snapshots will be upload
to the FTP.
If the SD card is not available or supported, you can enable this
function and configure FTP to make it work.
If the SD card is available, the messages will be saved in the SD
card by default, and this option is invalid.
Select Enable, and then the meaasges from visitors will be uploaded to
the FTP server. If the call from the VTO to the VTH is not answered, the
"No one answers" voice notice comes up. Tap 1 to leave a video or audio
message. The message will be upload to the FTP, and the VTO users
can view the messages on the VTH.
Click OK to save. Step 3
7.3.4 System Time
This section introduces how to configure the date format, time format, and the NTP server.
Select System Config > Local Config > System Time. Step 1
The System Time interface is displayed. See Figure 7-8.
To Next Page
Loading...
Need help?
General
