Web Interface 64
System time Figure 7-8
Configure System time parameters. See Table 7-4 for the details. Step 2
Table 7-4 System time parameter
You can select from Year-Month-Day, Month-Day-Year, and
Day-Month-Year.
Configure the time format, and you can select from 12-Hour or
24-Hour.
Configure the VTO system date, time and time zone, and then click
OK.
Do not change the system time arbitrarily; it might cause problems on
video searching and publishing snapshot or notice. Before changing
the system time, turn off video recording or auto snapshot.
Click to sync the VTO system time and the PC system time.
Select the check box to enable NTP timing.
Enter the domain name and the IP address of the NTP server.
The time zone of the current area.
The port number of the NTP server.
The time interval that the VTO syncs time with the NTP server, and it is
30 min at most.
Click OK to save. Step 3
7.3.5 Config Manager
This section introduces how to import or export the system config, network config, and video
config, and how to reset the VTO.
Select System Config > Local Config > Config Manager, and then the Config Manager
interface is displayed. See Figure 7-9.
Config manager Figure 7-9
To Next Page
Loading...
Need help?
General
