Operating VTO 56
Parameter setting Figure 6-36
Tap + or - to add or reduce the value. Step 3
The volume range is 0–100.
The brightness range is 1–9.
The Screensaver Time is the time that the VTO idles until the screensaver comes
up, and the range is 30 s–300 s.
The Brightness Time includes the Screensaver Time and the duration of the
screensaver, and when the Brightness Time ends, the VTO screen is off. The
Brightness Time range is 10 m–300 m.
Info 6.7
6.7.1 Viewing Device Information
This can be used by the technical support to do troubleshooting.
In the main interface, enter "#VTO password#." Step 1
The IP Setting interface is displayed.
Tap Info. Step 2
The Web Port, Main Version, and MCU Version are displayed. See Figure 6-37.
To Next Page
Loading...
