Web Interface 59
Email setting Figure 7-2
Select the Email check box, and then enter your Email address. Step 3
This Email address can be used to reset the password, and it is recommended to finish
this setting.
Click Next. Step 4
The Device Succeed interface is displayed, and the initialization is finished. See
Figure 7-3.
Device succeed Figure 7-3
Click OK. Step 5
The login interface is displayed.
Login 7.2
Make sure the PC is in the same network segment with the VTO.
Enter the default IP address of the VTO in the address bar, and then press enter. Step 1
The login interface is displayed. See Figure 7-4.
To Next Page
Loading...
