Dahua DH-VTO9341D - Adding and Managing VTO;VTH Devices

Configuring Devices 18
Parameter
Description
Username
Leave to the default.
Password
SIP Domain
Leave it blank or keep the default.
Login
UserName
The username and password of the SIP server.
Login PWD
If third party server is configured as SIP server, see the manual of the server for the detailed
configuration.
5.1.1.5 Adding VTO
Login the Web interface of the VTO that is configured as SIP server. Step 1
Select System Config > Device Manager > Outdoor Station Manager. Step 2
The Outdoor Station Manager interface is displayed, see Figure 5-8.
Outdoor station manager Figure 5-8
Click Add. Step 3
The Add interface is displayed. See Figure 5-9.
Add Figure 5-9
Configure VTO parameters. See Table 5-3 for the details. Step 4
Table 5-3 VTO parameters
Parameter
Description
No.
The number you planned for the VTO.
Register Password
Leave to the default.