User’s Manual EM11A015B
intelligent Touch Manager
179
Touch the Modify button under Offset and display the Numerical Input dialog to enter the offset.
For the range of values you can enter, see “Appendix 2. Setup items”.
(4) Hysteresis setting area
Sets up the range of the dead zone.
Touch the Modify button and enter the range in the Numerical Input dialog that appears.
For the range of values you can enter, see “Appendix 2. Setup items”.
(5) OK button
Saves the edit and closes the screen.
(6) Cancel button
Cancels the edit and closes the screen.
To Next Page
Loading...
