Daikin DCM601A52 - CSV Output Tool

User’s Manual EM11A015B
intelligent Touch Manager
146
7-2 CSV Output Tool
The CSV output tool is an external tool that runs on a PC to convert the output data from the iTM into
the CSV format.
Data is saved at the same time when output from the iTM unit or when downloaded via the Web
Remote Management function.
For the PC/USB memory requirements to use this function, see “Peripheral Equipment
Specications (CB14A005)”.
The following output data must be converted into the CSV format:
• History data
• Energy Navigator
Energy data
Management point data
Failure to turn off data
Setpoint gap data
Data output flow figure
Data output Folder
copy
USB memory
Ethernet
Downloads
from Web
Expand
PC
Folder
• DB file
• CSV output tool
DB converter
starting
Load Data
conversion
CSV file
load
CSV
output tool
CSV file
Commercial software,
such as Excel
Compressed
file
Web function
iTM
If an error message appears when you start the CSV output tool,
see “14-1 Before Having the Product Serviced: <About CSV output tool>”.
NOTE