User’s Manual EM11A015B
intelligent Touch Manager
294
• If the destination USB memory contains any le with the same name, take one of the following
measures.
Move the le contained in the USB memory to a computer.
Change the name of the le contained in the USB memory.
Delete the le contained in the USB memory. (Conrm that deleting the le does not cause a problem.)
• The USB memory is not connected to iTM.
Connect the USB memory to iTM and output the le again.
• The USB memory is disconnected during le output.
Do not disconnect the USB memory during le output.
Connect the USB memory to iTM and output the le again.
To Next Page
Loading...
