Dalsa Falcon 4-CLHS Series User Manual

Falcon™ 4-CLHS Series Operational Reference  49
Lens Shading Correction Category
The Falcon4 Lens Shading Correction controls, as shown by CamExpert, has parameters to
configure the lens shading correction features.
Lens Shading Correction Feature Descriptions
Display Name Feature & Values Description
Device
Version
& View
Lens Shading Correction Mode lensShadingCorrectionMode Sets the mode for the lens shading
correction.
1.01
Expert
DFNC
Off Off Lens Shading Correction is Disabled
Active Active Lens Shading Correction is Enabled
Calibration Calibration
When selected, the camera is configured for
Lens Shading correction calibration. Some
processing will be disabled even if the
associated feature is enabled.
Lens Shading Correction Active Set lensShadingCorrectionCurrentActiveSet
Specifies the current set of Lens Shading
Coefficients to use.
1.01
Expert
DFNC
User Shading Coefficients 1 ShadingCoefficients1
Sets User Shading Coefficients set 1 as
current.
Lens Shading Calibration lensShadingCorrectionCalibrationBright Perform a bright calibration for lens shading
correction. This calibration requires a bright
featureless acquisition that is not saturated.
(70% illumination is recommended).
1.01
Expert
DFNC
Save Calibration lensShadingCorrectionCalibrationSave Save the calibration results of the
lensShadingCorrectionCalibrationBright
operations to the active set.
1.01
Expert
DFNC
Reset Coefficients lensShadingResetCoefficients Reset lens shading coefficients to pass-
through.
1.01
Expert
DFNC

Dalsa Falcon 4-CLHS Series Specifications

General

Brand	Dalsa
Model	Falcon 4-CLHS Series
Category	Digital Camera
Language	English