Dalsa Falcon 4-CLHS Series - I;O Mating Connector Specifications & Sources

96  Technical Specifications Falcon™ 4-CLHS Series
I/O Mating Connector Specifications & Sources
For users wishing to build their own custom I/O cabling, the following product information is
provided to expedite your cable solutions. The SAMTEC web information for the discrete connector
and a cable assembly with retention clips follows the table below.
MFG Part # Description Data Sheet
Samtec
ISDF-05-D
ISDF-05-D-M (see image below)
Discrete Connector
(see example below)
https://www.samtec.com/products/isdf
Samtec
SFSD-05-[WG]-G-[AL]-DR-[E2O]
WG : Wire Gauge
AL : Assembled Length
E2O : End 2 Option
Discrete Cable
Assembly
(see example below)
https://www.samtec.com/products/sfsd
ISDF-05-D-M Connector Availability On-Line
North-America (specific country can be selected) http://www.newark.com/samtec/isdf-05-d-m/connector-housing-
receptacle-10/dp/06R6184
Europe (specific country can be selected) http://uk.farnell.com/samtec/isdf-05-d-m/receptacle-1-27mm-
crimp-10way/dp/2308547?ost=ISDF-05-D-M
Asia-Pacific (specific country can be selected) http://sg.element14.com/samtec/isdf-05-d-m/receptacle-1-27mm-
crimp-10way/dp/2308547?ost=ISDF-05-D-M
Important: Samtec ISDF-05-D-S is not compatible with Falcon4.
Samtec ISDF-05-D-M mating connector for customer-built cables w/retention clips
“.050” Tiger Eye™ Discrete Wire Socket Housing”