Dalsa Falcon 4-CLHS Series - Acquisition and Transfer Control Category; Acquisition and Transfer Feature Descriptions

Falcon™ 4-CLHS Series Operational Reference  63
Acquisition and Transfer Control Category
The Acquisition and Transfer controls as shown by CamExpert, has parameters used to configure
the optional acquisition modes of the device.
Acquisition and Transfer Feature Descriptions
Display Name Feature & Values Description
Device
Version
& View
Acquisition Mode AcquisitionMode Defines the way that frames are acquired.
1.00
Beginner
Continuous Continuous
Frames are captured continuously until stopped
with the "Acquisition Stop" command.
Acquisition Start AcquisitionStart
Commands the camera to start sending image
data.
1.00
Beginner
Acquisition Stop AcquisitionStop
Commands the camera to stop sending image
data at the end of the current line.
1.00
Beginner
Acquisition Status AcquisitionStatus Indicates whether the camera has been
commanded to send image data.
1.00
Beginner
Not Acquiring NotAcquiring Not Acquiring
Acquiring Acquiring Acquiring