Dalsa Falcon 4-CLHS Series - Metadata Controls Category; Metadata Controls Feature Description

80  Operational Reference Falcon™ 4-CLHS Series
Metadata Controls Category
The Metadata Controls category, as shown by CamExpert, groups parameters used to configure the
inclusion of various metadata (referred to as chunk data in GenApi) in the payload of the image.
Note that metadata is only available in 8-bit mode. Also, if an ROI is defined, the horizontal ROI
must be at least 416 columns (pixels) wide.
Metadata Controls Feature Description
Display Name Feature & Values Description
Device
Version
& View
Metadata Mode ChunkModeActive
Activates the inclusion of chunk data in the payload of the
image.
1.02
Guru