Dalsa Xtium-CL MX4 - Executing the Firmware Loader from the Start Menu; Figure 4: Start Menu Firmware Update Shortcut

20 • Installing Xtium-CL MX4 Xtium-CL MX4 User's Manual
Executing the Firmware Loader from the Start Menu
If required, the Xtium-CL MX4 Firmware Loader program is executed via the Windows Start Menu
shortcut Start • Programs • Teledyne DALSA • Xtium-CL MX4 Driver • Firmware Update.
Figure 4: Start Menu Firmware Update Shortcut
A firmware change after installation is required to select a different configuration mode. For
supported configurations, see the Supported Camera Link Configurations section.