Dell EMC NX3240 - Opening and Closing the Pcie Card Holder Latch

NOTE: Ensure that x16 cards are installed only in x16 slots. Depending on the riser conguration slots 2, 7, or 8 may not be
available.
Identifier GUID-1EB4C313-0709-47B3-B840-D2F76B1792F4
Status Released
Opening and closing the PCIe card holder latch
Before installing or removing a full length PCIe card, the PCIe card holder latch must be closed. When the full length PCIe card is installed,
open the PCIe card holder latch.
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Follow the procedure listed in Before working inside your system.
Steps
1 To open the PCIe card holder latch, press the release tab.
Figure 60. Opening the PCIe card holder latch
2 To close the PCIe card holder latch, push the latch until it locks.
Installing and removing system components
115