Dell EMC NX3240 - Installing a 3.5-Inch Adapter into a 3.5-Inch Drive Carrier

Figure 43. Removing a 3.5-inch adapter from a 3.5-inch drive carrier
Next step
Install a 3.5-inch adapter into a 3.5-inch drive carrier.
Identifier GUID-9F34D41D-3830-43EF-A7D1-373FF091EB3C
Status Released
Installing a 3.5-inch adapter into a 3.5-inch drive carrier
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Insert the 3.5-inch drive adapter into the drive carrier with the connector end of the drive toward the back of the drive carrier.
2 Align the screw holes on the drive with the holes on the drive carrier.
3 Install the screws to secure the drive to the drive carrier.
Installing and removing system components
95