Figure 98. Removing a power supply unit blank
Next step
Install the second PSU.
Identifier GUID-616BB0EF-6DB1-412F-BF4B-5EB80A12AF12
Status Released
Installing a power supply unit blank
Prerequisites
1 Follow the safety guidelines listed in Safety instructions.
2 Install the power supply unit (PSU) blank only in the second PSU bay.
Step
Align the PSU blank with the PSU slot and push it into the PSU slot until it clicks into place.
Figure 99. Installing a power supply unit blank
Next step
Follow the procedure listed in After working inside your system.
146
Installing and removing system components
To Next Page
Loading...
