Identifier GUID-3F8051A3-371E-4985-838C-BB6A071711F5
Status Released
Using system diagnostics
If you experience a problem with your system, run the system diagnostics before contacting Dell EMC for technical assistance. The
purpose of running system diagnostics is to test your system hardware without using additional equipment or risking data loss. If you are
unable to x the problem yourself, service and support personnel can use the diagnostics results to help you solve the problem.
Identifier GUID-A1053DCB-EBE8-4A4D-80E1-9939E42B6DB7
Status Released
Dell EMC Embedded System Diagnostics
NOTE
: The Dell EMC Embedded System Diagnostics is also known as Enhanced Pre-boot System Assessment (ePSA)
diagnostics.
The Embedded System Diagnostics provides a set of options for particular device groups or devices allowing you to:
• Run tests automatically or in an interactive mode
• Repeat tests
• Display or save test results
• Run thorough tests to introduce additional test options to provide extra information about the failed device(s)
• View status messages that inform you if tests are completed successfully
• View error messages that inform you of problems encountered during testing
Identifier GUID-1A588BE4-070A-47F3-AF45-72BBEE532007
Status Released
Running the Embedded System Diagnostics from Boot
Manager
Run the Embedded System Diagnostics (ePSA) if your system does not boot.
1 When the system is booting, press F11.
2 Use the up arrow and down arrow keys to select System Utilities > Launch Diagnostics.
3 Alternatively, when the system is booting, press F10, select Hardware Diagnostics > Run Hardware Diagnostics.
The ePSA Pre-boot System Assessment window is displayed, listing all devices detected in the system. The diagnostics starts
executing the tests on all the detected devices.
7
Using system diagnostics 159
To Next Page
Loading...
