Figure 25. Removing a cooling fan
NOTE: The images shown here are for representation only and the actual conguration of your system may vary.
Next step
If applicable, install the cooling fan.
Identifier GUID-B4C760F3-BB64-446B-902A-1EA4DC9A5243
Status Released
Installing a cooling fan
Prerequisites
WARNING
: Opening or removing the system cover when the system is on may expose you to a risk of electric shock. Exercise
utmost care while removing or installing cooling fans.
CAUTION: The cooling fans are hot swappable. To maintain proper cooling while the system is on, replace only one fan at a time.
Follow the safety guidelines listed in Safety instructions.
Steps
1 Holding the release tab, align the connector at the base of the cooling fan with the connector on the system board.
Installing and removing system components
77
To Next Page
Loading...
