Dell EMC NX3240 - Installing the Expansion Card Riser 1

Figure 72. Removing the expansion card riser 1
Next step
Install the expansion card riser 1.
Identifier GUID-9467CFB2-CA5B-4C72-BAD5-890FED05C731
Status Released
Installing the expansion card riser 1
Prerequisite
Follow the safety guidelines listed in Safety instructions.
Steps
1 Align the guide rails on the riser with the standos on the side of the system.
2 Lower the riser into the system until the riser connector engages with the connector on the system board.
124
Installing and removing system components