Dell EMC NX3240 - Viewing Home Screen; Setup Menu; View Menu

Identifier GUID-F43E5A06-3694-4F8A-B512-FEE21757EBE2
Status Released
Viewing Home screen
The Home screen displays user-congurable information about the system. This screen is displayed during normal system operation when
there are no status messages or errors. When the system turns o and there are no errors, LCD enters the standby mode after ve
minutes of inactivity. Press any button on the LCD to turn it on.
1 To view the Home screen, press one of the three navigation buttons (Select, Left, or Right).
2 To navigate to the Home screen from another menu, complete the following steps:
a
Press and hold the navigation button till the up arrow is displayed.
b
Navigate to the Home icon using the up arrow .
c Select the Home icon.
d On the Home screen, press the Select button to enter the main menu.
Identifier GUID-5C32F40B-4DEF-4B73-96DA-B94DA8E20311
Status Released
Setup menu
NOTE
: When you select an option in the Setup menu, you must conrm the option before proceeding to the next action.
Option Description
iDRAC Select DHCP or Static IP to congure the network mode. If Static IP is selected, the available elds are IP,
Subnet (Sub), and Gateway (Gtw). Select Setup DNS to enable DNS and to view domain addresses. Two
separate DNS entries are available.
Set error Select SEL to view LCD error messages in a format that matches the IPMI description in the SEL. This enables you
to match an LCD message with an SEL entry.
Select Simple to view LCD error messages in a simplied user-friendly description. For more information about
error messages, see the Dell Event and Error Messages Reference Guide at Dell.com/openmanagemanuals >
OpenManage software.
Set home Select the default information to be displayed on the Home screen. See the View Menu section for the options and
option items that can be set as the default on the Home screen.
Identifier GUID-9E27B885-747C-4305-9ABC-B990B92A93BA
Status Released
View menu
NOTE
: When you select an option in the View menu, you must conrm the option before proceeding to the next action.
NX3240 system overview 21