Dell EMC NX3240 - System Information; Viewing System Information

Option Description
System Security Species options to congure the system security settings, such as system password, setup password, Trusted
Platform Module (TPM) security, and UEFI secure boot. This option also manages the power button on the
system.
Miscellaneous
Settings
Species options to change the system date and time.
Identifier GUID-6F222CC7-DC70-4B50-89EB-4BF248D00BFC
Status Released
System Information
You can use the System Information screen to view system properties such as Service Tag, system model name, and the BIOS version.
Identifier GUID-0CBB7BD6-781D-4C4E-893B-C5FA8D58F705
Status Released
Viewing System Information
To view the System Information screen, perform the following steps:
1 Turn on, or restart your system.
2 Press F2 immediately after you see the following message:
F2 = System Setup
NOTE
: If your operating system begins to load before you press F2, wait for the system to nish booting, and then restart
your system and try again.
3 On the System Setup Main Menu screen, click System BIOS.
4 On the System BIOS screen, click System Information.
Identifier GUID-816A8F25-7DF4-4A45-A9EE-89438ED2F781
Status Released
System Information details
The System Information screen details are explained as follows:
NOTE
: The Dell EMC Storage NX3240 system does not support UEFI mode.
Option Description
System Model
Name
Species the system model name.
System BIOS
Version
Species the BIOS version installed on the system.
System
Management
Engine Version
Species the current version of the Management Engine rmware.
System Service Tag Species the system Service Tag.
System
Manufacturer
Species the name of the system manufacturer.
Pre-operating system management applications 41