Figure 20. Inside the system – mid drive tray and rear drive cage
1
drive backplane 2 backplane expander card
3 cooling fan (6) in the cooling fan assembly 4 drive (4) in the mid drive tray
5 mid drive backplane 6 rear drive backplane
7 drive (2 or 4) in the rear drive cage 8 system board
9 expansion card riser 1 10 integrated storage controller card
Identifier GUID-3C4EE3CA-237F-4BC4-8954-A645426AE163
Status Released
Air shroud
The air shroud directs the airow across the entire system. Air shroud prevents the system from overheating and is used to maintain
uniform airow inside the system.
This section contains information about the removal and installation of the air shroud.
Installing and removing system components
71
To Next Page
Loading...
