3 Copy
112
1
Use [+] and [-] or the numeric keypad to
specify a binding shift value.
[Booklet Creation - Divide Output] Screen
You can divide the booklet into subsets of the specified number of sheets.
The number of sheets per subset can be in the range from 1 to 50 in 1 sheet increments.
Note • For stapling, specify a number from 1 to 15.
1
Select [On].
2
Specify the number of sheets per subset using [+] and [-] or the numeric keypad.
[Booklet Creation - Fold & Staple] Screen
When the Booklet Maker Unit for Finisher-B1 (optional) is installed, [Fold Only] and [Fold
& Staple] are available.
1
Select any option.
Off
The copies will not be creased, folded, nor stapled.
Fold Only
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is installed.
The output sheets will be creased at the center for folding. When the total number of sheets
is more than 5, the booklet will be divided into subsets of 5 sheets.
Fold & Staple
This option is displayed when the Booklet Maker Unit for Finisher-B1 (optional) is installed.
The output sheets will be stapled at the center and will be creased for folding. When the total
number of sheets is more than 15, the booklet will be divided into subsets of 15 sheets.
To Next Page
Loading...
Need help?
General